Suppose you are using a Xerox printer in your home or office for your work, but suddenly it stops working. You need to figure out what is the reason why the xerox printer not printing and how you can fix this issue. Then you can go through the content to learn about your facing issue and how to fix it.

Why is my xerox printer not printing?

• If your xerox printer is not working, then that could be the cable connection issue. You need to check whether the printer wire is correctly plugged in.
• You can also check the cartridge machine whether there is any fault issue so that you can replace it with the latest one.
• Sometimes connection issues can be problematic because your xerox machine is not working, so check the settings section to connect your device to the printer correctly.

How can I fix the error of the paper not printing?

You must ensure the paper is properly arranged and inserted inside the printer. If the issue is still there, you can load different types of writing and check for the dimension; after that, try to print again.

• You can also double-check that you have selected the correct printer option in the print section in your system.
• Open the print settings, then go to the destination option.
• Click on the printer you use for printing, then click on done.

Why is my xerox printer not printing after changing cartridges?

If your Xerox printer is not printing after changing the cartridge, then you need to check the USB cable to be properly plugged into the printer and ensure that the plug is completely attached to the wall.

Still does not work, then you can look into wifi connection. You need to switch off the wifi in the setting section and turn it on again. It might work, and your printer will start printing, or you can keep the printer closer to the router so there will be no interruption between signals.

How can I run troubleshooting to fix the issue?

You can run troubleshooting to fix the issue with the help of the below-written method. The method includes simple steps that will redirect you to the setting page, where you can proceed further with troubleshooting tasks.

To resolve the issue, you need to check whether the printer is not set to offline mode after following the steps.

• Go to the start section and click on it.
• After that, move to the settings option and click on the “Bluetooth and devices” option.
• Now the page will show you the printer and scanner tab; select it.
• Tap on your suitable printer and open the print queue.
• At last, check that the printer offline is not selected.
• Finally, you are all set, and the printer has been troubleshot. You can now restart your printer from its initial stage.

How do I reset my Xerox printer?

You need to move to the printer control panel, sign up with an administrator account, and click the home button.

• Now tap on the device and then on the resets.
• After that, you can select the reset to factory defaults.
• Move to the prompt section and click on the reset button.
• Finally, your process is complete, and the printer will restart automatically.

These are some of the necessary information that can help you when your Xerox printer is not printing. You can follow this article again for further clarification. 

Read More About:

• How Do I Install a Xerox Printer
• Xerox Printer Paper Jam
• How do I contact Xerox support?